Renault Trafic Radio Codes

The fastest way to get your code without touching the radio. Your VIN is printed on the windscreen base plate (visible from outside the car), the driver’s door jam sticker, or in your V5C logbook.

Renault VINs typically start with VF1, 8A1, 93Y or 9FB. Enter all 17 characters in the serial field above.

Your code is delivered instantly provided the VIN entered is correct.

Simply enter your vehicle's VIN number into the serial number box at the top of this page and we will do the rest. No radio removal required.

Your VIN number can be found on the windscreen, in the door jamb of your car, or on your vehicle registration document.

See our full Renault authentication key guide →

On the Renault Trafic and Master the quickest way to get your code is the vehicle VIN (step 1 above). That alone unlocks it, with nothing to remove. If you would rather not use the VIN, you can read the numbers from the radio label instead. There is no screen method, so remove the unit (release keys into the four corner holes, slide it forward).

Visteon unit: enter the serial (a barcode, roughly 11 characters, for example 03RAI4I0182) and the part code (the Renault Part Code, starting 281 and ending in R, for example 281152752R).

Renault unit: enter the single security number, or the barcode starting 2811, 8200 or 7700 (for example 281157844RTC109), on its own.

If you cannot use your VIN, the serial number is on a label on the radio unit itself. You will need to remove it from the dashboard.

Older models (Clio I to III, Megane I to II, Scenic I to II, Laguna, Trafic): Insert radio release keys into the four small pinholes at each corner of the fascia. Push inward and apply gentle outward pressure. The unit slides forward. No wires need to be disconnected.

Newer models (Clio IV+, Captur, Scenic III+, Kadjar, ZOE, touchscreen units): Use a trim prying tool to carefully remove the surrounding trim panel, then unscrew the mounting screws and slide the unit forward.

Your serial number will be in one of these formats:

Letter + 3 digits (e.g. H758, A123). Philips or Blaupunkt unit. Often printed at the end of a longer barcode, in a box labelled "Security", "Pre Code" or "Code".

2811 prefix (e.g. 281150198RTC703). Enter the full number as your serial. Use the boxed number near the bottom of the label, not the part code at the top.

8200 barcode (e.g. 8200607918TJ110). Enter the full barcode number.

7700 barcode (e.g. 7700433948T0540). Enter the full barcode number.