Nissan Note Radio Codes

Nissan Connect Bosch LCN EU Radio

• When ON, the radio display will show CODE.
• Enter 3 incorrect codes into the system, pressing "OK" to confirm each.
• Upon the third attempt your radio will show "system is locked for 60 minutes" & display the information needed to decode your radio.
• You need the 'Serial number', 'Device number' and 'Date'. this will show on the radios display.
• Please see image for reference.
• Make note of all the information, you need this when ordering your decode.
• Ensure the date is entered as displayed on your screen.

Nissan Daewoo Radio

• Turn the ignition switch ON.
• 'RADIO CODE' will show on-screen.
• Enter an incorrect code 3 times. For example, enter 1-2-3-4.
• The Serial number, Part number and Date will display on the radio screen.
• In approximately 80% of cases, the information shown on the screen will match the label on the radio and can be used to generate your code.
• However, on some Daewoo units the date shown on the screen may differ from the date printed on the radio label.
• If this happens, you will need to remove the radio and send a clear photo of the label on the casing.
• Make note of these numbers and copy the date exactly as it appears on-screen.

Nissan Clarion

It is quite simple to remove your Nissan radio. You will need a flat-head screwdriver for prying the panels off the dash to Access the radio. Clarion radio removal keys are ideal for freeing the head unit from the mount.

Different car radio models require differently shaped removal keys.

For further help in removing your Nissan Clarion radio, please see this YouTube video.

Nissan Blaupunkt

It is quite simple to remove your Nissan Note Blaupunkt radio. You will need a screwdriver.

Once you have a screwdriver, pull the 4 screws out from the 4 holes in each corner of the radio, two are at the top and 2 are underneath. apply a little pressure and the radio will release from the dashboard. The radios label will be located on the radio's casing.