Nissan Almera Radio Codes

Nissan Connect Bosch LCN EU

• When ON, the radio display will show CODE.
• Enter 3 incorrect codes into the system, pressing "OK" to confirm each.
• Upon the third attempt, your radio will show "system is locked for 60 minutes" & display the information needed to decode your radio.
• You need the 'Serial number', 'Device number' and 'Date'. this will show on the radios display.
• Please see the image for reference.
• Make note of all the information, you need this when ordering your decode.
• Ensure the date is entered as displayed on your screen, any radios that show a display date as 30.39.30 cannot be decoded by us, unfortunately.

Helpful Info: Nissan Connect Bosch systems only show the information we need on screen. You do not need to take out your radio.

Nissan Daewoo

• Turn the ignition switch ON.
• 'RADIO CODE' will show on-screen.
• Enter an incorrect code 3 times. For example, enter 1-2-3-4.
• The Serial number, Part number and Date will display on the radio screen.
• In approximately 80% of cases, the information shown on the screen will match the label on the radio and can be used to generate your code.
• However, on some Daewoo units the date shown on the screen may differ from the date printed on the radio label.
• If this happens, you will need to remove the radio and send a clear photo of the label on the casing.
• Make note of these numbers and copy the date exactly as it appears on-screen.

Nissan Almera Clarion 2007+

To get your serial number for the Nissan Clarion radio you must take the radio out. It is quite simple to do so. You will need a prying tool or flat-head screwdriver for prying the panels off the dash to access the radio.

Once removed, your radios label should say:

• Model Number - PP3001
• Serial Number - PP3001 0771234
• It could also be a 14 character long CLxxxxxx0768345 number where the last 7 digits start with a '0'

Removal video guide attached.

Nissan Almera Clarion 2000-2006

It is quite simple to remove your Nissan Almera Clarion radio. You will need a prying tool to remove the panels and a screwdriver to take the screws off. After you've done this, the radio should be free to pull from the dashboard. Please watch the video for further guidance.